Specifications:

• Input power: 11~15V DC /15 Amp (at maximum charge rate)
• Charge current: 0.1~8.0A (0.1A/step)
• Discharger current: 0.1~3.0A (0.1A/step)
• Max. charge power: 150Watt
• Max. discharge power: 15Watt
• Balance charge current: <400mA
• Balance accuracy: <10mV
• Voltage tolerance: 0.10%
• Capacity display: 0~9999mAH
• Supported batteries: 1~6 cells Li-Po, Li-Ion, Li-Mn (2~6 cells balance charging)
• 3x 2S or 2 x 3S simultaneous charge with optional adaptor
• 1~8 cells LiFePO4 (2~6 cells in balance charge)
• 1~18 cells NiMH, NiCd
• 1~12 cells (2~24V) Pb(SLA)
• Temperature control: Automatic
• PC connection: USB port
• Additional functions: Servo test (Linear, Speed, Deadband)
• Can be used as a variable voltage DC power supply (3.0~30V DC output)
• Weight: 450g
• Size (LxWxD) 145x100x40mm (5.71"x3.94"x1.57")

System Features:

• High power, high current, high-performance power conversion circuitry. Maxpro X6-Plus uses advanced DC/DC converter technology with high output conversion efficiency
• The X6-Plus can be used with four types of Lithium batteries (Li-Po, Li-lon, Li-FePO4, Li-Mn) and has a build-in balancer.
• Optimized charging technique for NiMH/NiCd
• Cooling FAN is controled automaticlly by internal temperature sensor and provides intelligent protection.
• 16*2 backlit LCD that displays the active mode, battery voltage, charge current, pack temperature, capacity (mAH added or removed) and charge/discharge times.
• Programmable charge settings.
• Li** batteries: normal charge, fast charge, balance, storage, discharge, charge/discharge cycle, and battery monitor.
• NiMH/NiCd & Pb batteries: charge, discharge, charge/discharge cycle.
• Perfect protection. The X6-Plus has protection for reversed polarity (input or output), low input voltage, battery temperature, charging capacity and battery voltage overrun.
• Battery internal resistance measurement with PC monitor software.
• DC power supply mode can provide 3.0~30V adjustable DC to meet your requirements.
• Build-in servo tester. Movement, Speed and Deadband of servos can be tested.
• Firmware upgradable via USB port. The charge/discharge data can be recorded & analyzed by PC monitor software & Battery analyzer software.

Standard items:

• Maxpro X6-Plus charger with input cables & clips
• One pair of output cables & alligator clips
• One temperature sensor
• One USB data cable
• One balance multi-adapter
• One CD (User's manual, PC monitor software, Battery Analyzer software inside)

Optional parts:

• Multi-connector output cable
• Multi-Battery Charging Adapter (3x2S/2x3S)

Download the Manual