***This ESC now comes with a new supercharged BEC! This new ESC has the same small and compact footprint, and power capabilities compared to the older version. The only difference is that Scorpion has changed the BEC to one which can work better with the current servos on the market even ones with very high amp peaks, or back voltage. This change unlocks many more applications for this ESC as it can handle a much wider spectrum of servos now.
Features
Airplane and Heli mode,
Stored and unstored Governor, external governor.
Data output port for external data logging device, such as Mikado V control / Vbar combinations. Jeti Telemetry , JLog 3.
ESC setup can be set by Mikado V control Radio.
PC connectivity, Android connectivity ( OTG cable needed) , V link II Cable(optional) plus Diode adaptor(included) cable needed.
Supported HvLi battery 6S total 26.1V.
Size: 47.1 x 31 x 20 mm
Weight: 60 Grams.
Scorpion Tribunus ESC (Tutorial) - Connecting to PC or MAC + Downloading SProto + Firmware Updates. Produced by Kyle Dahl
Mikado Proving Ground Produced by Kyle Dahl
How to set up the esc
** Scorpion Tribunus 06-80A - User Manual
** Scorpion Tribunus Heli Program Sproto
Scorpion V Link II Cable CH340 Driver (For all ESC use)
How to DIY your own Telemetry/setup cable for the Tribunus ESCs – Vbar NEO
How to DIY your own Telemetry/setup cable for the Tribunus ESCs – Jeti
Specifications
Max Continuous Current | 80 Amps |
Peak Current | 120 Amps |
Operating Voltage Range | 11-26.1 Volts |
BEC Output voltage: | 5.1V to 7.1V adjustable. |
Max Continuous BEC Output | 8 Amps @ 7.1 V |
Max BEC Output | 12A pules |
On Resistance | 0.6 mOhm *2 |
Size | 47.1 x 31 x 20 mm (1.85 x 1.22 x 0.79 in) |
Weight (Without Connectors) | 60g (2.1 oz) |
Drive frequency | 8kHz - 32kHz |
Weight including packaging
250g